Get Your Network Infrastructure Installed Alongside Your Furniture — One Crew, One Schedule
Stop coordinating separate cabling and furniture vendors. We integrate Cat6, fiber, and voice cabling into your furniture installation for a single, seamless deployment.
Vector Installation Services provides structured cabling alongside our furniture installation projects across Southern California. From Cat5e/Cat6/Cat6a data drops to fiber backbone and voice lines, our low-voltage technicians work in lockstep with our furniture crews — eliminating the scheduling conflicts and finger-pointing that come with managing separate vendors.
No obligation · Takes 30 seconds
20Ksq ft
Buena Park warehouse
CSLBlicensed
License #1088412
Nights
and weekends
OC, LA, Inland Empire + San Diego
Service area
Trusted on projects for
Verify our CSLB license and request insurance documents
The Problem With Most Contractors
✕What You're Dealing With
Two Vendors, Two Schedules, Double the Delays
Your cabling contractor can't start until the furniture is in, but the furniture installer needs the cables roughed in first. Somebody has to blink — and it's always your timeline.
Cables Running Everywhere After Move-In
Exposed cables, trip hazards, and messy wire management because the cabling wasn't planned alongside the furniture layout.
Surprise Low-Voltage Costs
The GC's cabling sub quotes per drop, but your furniture plan changed twice since then — and every change order adds thousands.
No Documentation After Install
Cables are in the walls and under the floor, but nobody can tell you which port goes where. Your IT team is tracing cables with a toner for weeks.
The Vector Difference
Furniture + Cabling Under One Roof
Our low-voltage techs and furniture installers share the same project schedule and staging area — no coordination gaps.
Clean Cable Management From Day One
Cables are routed through furniture raceways, power poles, and cable trays during installation — not zip-tied as an afterthought.
Do-Not-Exceed Data Drops
We quote your cabling alongside your furniture scope. One do-not-exceed number for the documented drops. Added drops are priced with you first.
Tested, Labeled, and Documented
Every run is tested with a Fluke certifier, labeled at both ends, and delivered with a complete cable map for your IT team.
Free walkthrough · No obligation
Recent Projects
How It Works
Simple, predictable, stress-free.
- 1
Review Floor Plan & IT Requirements
We coordinate with your IT team or MSP to understand drop locations, cable types, and any special requirements like PoE or 10Gb.
- 2
Integrated Scope & Quote
Cabling is quoted alongside your furniture installation in a single proposal with a unified timeline.
- 3
Rough-In & Pathway Prep
Cable pathways, J-hooks, and conduit are installed before or simultaneously with furniture placement.
- 4
Pull, Terminate & Test
Cables are pulled to each workstation, terminated at patch panels and keystones, and Fluke-certified.
- 5
Documentation & Handoff
Your IT team receives a complete cable schedule with port assignments, test results, and as-built diagrams.
What's Included
Cat5e / Cat6 / Cat6a
Standard copper data drops for workstations, WAPs, printers, and VoIP phones — terminated and certified.
Fiber Optic Backbone
Single-mode and multi-mode fiber runs between IDFs, MDFs, and server rooms with fusion-spliced or mechanical connectors.
Voice & VoIP
Traditional voice lines or VoIP-ready cabling integrated with your phone system and furniture layout.
Wireless Access Point Drops
Ceiling-mounted WAP drops with PoE cabling placed per your wireless heat map for optimal coverage.
Transparent, Do-Not-Exceed Quotes
We provide a written proposal before work begins, with the requested services and assumptions documented for review.
Project scope
Never Over Your Quote for the Documented Scope
Anything outside the written scope is quoted as a change order you approve before we do it.
- Your invoice will never exceed your quote for the documented scope
- No hourly billing surprises
- Free on-site assessment included
- Detailed scope of work before we start
Frequently Asked Questions
Yes. While most of our cabling work is bundled with furniture installations, we also take standalone structured cabling projects for offices, warehouses, and commercial spaces.
We install Cat5e, Cat6, and Cat6a copper cabling as well as single-mode and multi-mode fiber. We'll recommend the right spec based on your bandwidth needs and budget.
Yes. Every copper and fiber run is tested with a Fluke DSX CableAnalyzer or equivalent. You receive documented test results showing pass/fail status for every link.
Absolutely. We coordinate directly with your internal IT department or MSP on drop locations, cable types, labeling conventions, and patch panel layouts.
We can assess existing infrastructure and extend, reroute, or replace cabling as needed. We'll recommend new runs where existing cable doesn't meet current standards.
Yes. J-hooks, cable trays, conduit, and innerduct are all part of our scope. Clean pathways are essential for a professional installation that passes inspection.
It depends on run length and pathway complexity. Send your floor plan and we send a written do-not-exceed quote.
Still have questions?
Call Us: (949) 444-0041Where We Work
Based in Buena Park, CA · Serving Orange County, Los Angeles County, the Inland Empire (Riverside and San Bernardino counties), and San Diego County
Orange County
Anaheim, Irvine, Santa Ana, Huntington Beach, Costa Mesa, Buena Park, Fullerton, Orange, Tustin, Lake Forest
Los Angeles County
Los Angeles, Pasadena, Long Beach, Torrance, Burbank, Glendale, Century City, Santa Monica, El Segundo, Culver City
Inland Empire — Riverside & San Bernardino Counties
Riverside, Corona, Chino Hills
San Diego County
San Diego
Related Services
Get Started
Let's Scope Your Project
Fill out the form, or reach out directly. We'll walk through your requirements, prepare a written project scope, and discuss scheduling.
Phone
(949) 444-0041Warehouse & Office
6388 Artesia Blvd. Buena Park, CA 90620
Licensed & Insured · CSLB# 1088412
Book a free walkthrough
Pick your county to see open dates. Our team walks the space with you and sends a written do-not-exceed quote.
Free walkthrough. Photos and drawings received during office hours are priced the same day.
Inland Empire or San Diego walkthrough, or questions? Call (949) 444-0041 or email us.
Need cabling with your furniture install? Get a combined quote today.
Send us your floor plan and IT requirements, and we'll quote furniture and cabling together — one scope, one schedule, one price.